Fenix - Headlamp HL16R (450 lumens)

The new compact Fenix HL16 AAA Headlamp is battery-powered and can serve as your lighting companion in a multitude of tasks. This LED headlamp reaches a maximum of 450 lumens and can throw a beam as far as 341 feet (104 meters). The convenient dual switch quickly controls four brightness levels of white light mode, as well as red light and SOS Flash. Made from high-strength PC material, this lightweight headlamp is rugged and reliable. And the widened perforated headband makes this headlamp extremely comfortable and stable to wear. Coupled with IP66 water and dustproof protection, the HL16 can meet various outdoor and indoor lighting needs.

SPECIFICATIONS

• Max Lumens: 450
• Max Beam Distance: 341 Feet (104 meters)
• Max Runtime: 100 hours
• Lighting Modes: 5 brightness levels, red light, and red SOS
• Bulb Type: Luminus SST20 white light, 2835 red LED
• Size: Width: 2.52” (64mm) Height: 1.89” (48mm) Depth: 1.06” (27mm)
• Weight: 3.43 oz (97.2 g) including batteries and headband
• Battery: Three included Alkaline AAA Batteries
• Included: Three Alkaline AAA batteries, hollow headband

MORE INFORMATION

RUNTIME

Use a Luminus SST20 white light and 2835 red light LED with a lifespan of 50,000 hours. White and red light sources for a variety of lighting demands. Easy and fast operation with dual switch. 60° tilt mechanism directs the beam where needed. Perforated and widened reflective headband for comfortable use, sweat-wicking and breathable, safety tips. The electronic lockout function avoids accidental activation. Made of quality PC, lightweight and wear-resistant.

Operating Instructions

Switches
Right: for on/off, mode switching, lockout function, output selection on white light mode.
Left: for on/off, mode switching, lockout function, output selection on red light mode.

On/off
With the headlamp switched off, press and hold the right switch for 0.5 seconds to enter the white light mode.
With the headlamp switched off, press and hold the left switch to enter the red light mode.
With the headlamp switched on, press and hold either of the switches for 0.5 seconds to turn off the headlamp.

Mode switching
With the headlamp switched on, single click the left/right switch to enter the previously used output on white light mode or to enter red light mode.

Output Selection
White light mode: single click the right switch to cycle through Low→Med →High →Turbo.
Red light mode: single click the left switch to cycle through Red light→SOS.

Lock/Unlock
Lock: when the lamp is switched off, press and hold either of the two switches or simultaneously press the two switches for 3 seconds, the lamp will blink red 4 times to indicate locked status.
Unlock: when the lamp is locked, simultaneously press the two switches for 3 seconds, the lamp will be activated with 4 one-second red blinks and activated on Red Light.
In locked status, clicking or pressing the switches will activate 4 one-second red blinks to indicate locked status.

Intelligent Memory Circuit
The headlamp memorises the last selected output on white light mode. When turned on again the previously used output will be recalled. Each time the Red Light mode is entered with red light.